First put the raw material paper rack on the paper feeding rack (three-axis paper). The paper feeding rack has an automatic paper feeding device and a paper feeding device, and then the paper is passed to the paper feeding roller, and there is a bar device before the paper feeding roller to spread the paper surface. It is flat, and the punching device enters the roll guide device at the end.
There are hollow paper shaft devices on both sides of the guide roller to make centerless paper rolls. The rewinding machine rolls the paper by repeatedly guiding the roll by the guide roller and the pressure roller (the tightness of the roll is adjusted according to the customer's requirements, and it is easily adjusted by the air pressure). The machine will automatically stop when the roll reaches a certain specification. roll out. The roll paper is separated by a paper cutter, and the paper is automatically sprayed and sealed while slitting the paper.
After the entire program is completed, the machine will restart automatically after the power-on delay expires. After the finished product is finished, the big saw will cut the paper into rolls of different specifications (customers require slitting). The whole process is controlled by computer programming PLC and frequency conversion.
